|
ADVANCES
IN OPTIMAL DESIGN |
Advances in the Optimal Design
of Vehicle Sub-Systems
[1] J.S. Arora, Introduction to Optimum Design, McGraw-Hill,
New York, 1989.
[2] P.M. Calderale, A. Grosso, and E. Marucco, Integration between the systematic and the creative approach in mechanical design, in "Proceeding of the XXV AIAS National Conference - Int. Conf. on Material Engineering", 1996.
[3] Alberto Colorni, Ricerca Operativa, Città Studi, 1991.
[4] W. Cormick, Nonlinear Programming, John Wiley & Sons, New York, 1973.
[5] L. Davis, Genetic Algorithms and Simulated Annealing, Pitman, Lon-don, 1990.
[6] L. Davis, The Handbook of Genetic Algorithms, Van Nostrand Reingold, New York, 1991.
[7] Discrete and Topologycal Structural Optimization, CISM, Udine, 1996.
[8] C. Doniselli, Su alcuni problemi di progetto del comando delle valvole con eccentrico e bilancere, Technical report, Dip. Meccanica, Politecnico di Milano, 1971.
[9] C. Doniselli and G. Mastinu, Bus suspension design: Optimization for comfort, in "Proc. of the 2nd International Conference - Vehicle Comfort (ergonomic, vibrational, noise and thermal aspects)", ATA, 1992.
[10] C. Doniselli and G. Mastinu, Tribological problems of cam gear design: Theoretical study and experimental simulation, in "Proc. of the 1st International Seminar High Performance S.I. Engines for Passenger Cars", ATA, 1992.
[11] C. Doniselli and G. Mastinu, Contributo alla soluzione di alcuni problemi di progettazione di sospensioni dell'autoveicolo, ATA, 1993.
[12] C. Doniselli and G. Mastinu, A method for optimal of valve gears, in "Proc. of the 2nd Int. Seminar High Performance S.L Engines for Passengers Cars", ATA, 1995.
[13] C. Doniselli, G. Mastinu, and M. Gobbi, Aerodynamic effects on ride comfort and road holding of automobiles, in "Proc. of the XIV IAVSD Symposium", Ann Arbor, Swets & Zeitlinger, 1995.
[14] C. Doniselli and V. Rongoni, Sul danneggiamento della coppia eccentrico-bilancere e relative scelte di progetto, ATA, 1975.
[15] H. Eschenauer et al., Multicriteria Design Optimization, Springer-Verlag, Berlin, 1990.
[16] R.L. Fox, Optimization Methods for Engineering Design, Addison-Wesley, 1971.
[17] R. Garfinkel and G. Nemhauser, Integer Programming, John Wiley & Sons, New York, 1972.
[18] M.D. Genkin et al., Multicriteria selection of optimal parameters for the automobile engine valve gear, "Mashinovedeniye", 3, 1983, pp. 60-68.
[19] A. Giussani, Applicazione degli algoritmi genetici alla progettazione strutturale, con particolare riguardo al calcolo dei telai motociclistici, Master thesis, Dip. Meccanica, Politecnico di Milano, 1996.
[20] M. Gobbi, Optimal design supported by stochastic search: a tutorial, Technical report, Dip. Meccanica, Politecnico di Milano, 1996.
[21] D.E. Goldberg, Genetic Algorithms in Search, Optimization, and Machine Learning, Addison-Wesley, 1989.
[22] D.E. Goldberg and J. Richardson, Genetic algorithms with sharing for multi-modal function optimization, in "Proceedings of the Second International Conference on Genetic Algorithms", 1987.
[23] P. Hajela, Genetic Algorithms in Automated Structural Synthesis, Optimization and Decision Support Systems, Kluwer Academic Publishers, 1990.
[24] P. Hajela, Stochastic search in discrete structural optimization, in "Discrete and Topologycal Structural Optimization", CISM, Udine, 1996.
[25] E.J. Haug and J.S. Arora, Applied Optimal Design, John Wiley & Sons, New York, 1979.
[26] W. Heinrich, Kreatives Problemlösen in der Konstruktion, in "Konstruktion", 44, 1992, pp. 57-63.
[27] J. Hertz, A. Krogh, and R.G. Palmer, Introduction to the Theory of Neural Computation, Addison Wesley, 1991.
[28] J. Holland, Adaptation in Natural and Artificial Systems, The University of Michigan Press, Ann Arbor, 1975.
[29] P. Kamat (ed.), Structural Optimization: Status and Promise, AIAA, Washington, 1993.
[30] U. Kirsh, Optimum Structural Design, McGraw-Hill, New York, 1981.
[31] W. Kortüm et al., Progress in integrated system analysis and design software for controlled vehicles, in "The Dynamics of Vehicles and Railway Traks", S. Shen (ed.), Swets & Zeitunger, 1993.
[32] B. Kroöse and P. van der Smagt, An Introduction to Neural Networks, The University of Amsterdam, 1993.
[33] H.W. Kuhn and A.W. Tucker, Nonlinear programming, in "Proceedings of the Second Berkeley Symposium on Mathematical Statistics and Probability", J. Neyman (ed.), Berkeley, 1951 pp. 481-492.
[34] C.Y. Lin and P. Hajela, Genetic search strategies in multi-criterion optimal design, "Structural Optimization", 4, 1992, pp. 99-107.
[35] G. Mastinu, Automotive suspension design by multi-objective programming, in "Proc. of the International Symposium on Advanced Vehicle Control AVEC94", JSAE, Tsukuba, 1994.
[36] G. Mastinu. Integrated controls and interactive multi-objective programming for the improvement of ride and handling of road vehicles, in "Smart Vehicles", J.P. Pauwelussen and H.B. Pacejka (eds.), Swets & Zeitlinger, 1995.
[37] G. Mastinu, E. Babbel, P. Lugner, D. Margolis, P. Mittermayr and B. Richter, Integrated controls of lateral vehicle dynamics, in "Proc. of the XXIII IAVSD Symposium", Swets & Zeitlinger, 1993.
[38] G. Mastinu and M. Gobbi, Sistema flessibile per la misura di grandezze che descrivono il moto dei veicoli, "Trasporti e Trazione", 1997.
[39] The Mathworks, Optimization Toolbox User's Guide, 1996.
[40] J.B. Matusov, Multicriteria Optimization and Engineering, Chapman & Hall, New York, 1995.
[41] J.J. Moré, Optimization Software Guide, SIAM, Philadelphia, 1993.
[42] W.-Y. Ng, Interactive Multi-Objective Programming as a Framework for Computer-Aided Control System Design, Springer-Verlag, Berlin, 1989.
[43] W. Overdieck, B. Richter and P. Zimmermann, Evolutionsstrategie ein Hilfsmittel bei der Lösung fahrzeugetechnischer Aufgaben, ATZ, 84, 1982, pp. 331-337.
[44] V. Pareto, Manuale di economia politica, Società Editrice Libraria, Milano, 1906.
[45] D. Perani and L. Persico, Progettazione con algoritmi genetici del telaio di un motociclo, Master thesis, Dip. Meccanica, Politecnico di Milano, 1996.
[46] D.T. Pham and Y. Yang, Optimization of multi-modal discrete functions using genetic algorithms, in "Proc. Inst. Mech. Engrs", 207, 1993.
[47] W. Press, S. Teukolsky, W. Vetterling, and B. Flannery, Numerical Recipes, Cambridge University Press, Cambridge, 1992.
[48] U.T. Ringertz, On methods for discrete structural optimization, "Engineering Optimization", 13, 1988, pp. 47-64.
[49] W. Rodenacker, Neue Gedanken zur Konstruktionsmethodik, "Konstruktion", 43, 1991, pp. 330-334.
[50] J.D. Schäffer, Some Experiments in Machine Learning Using Vector Evaluated Genetic Algorithms, PhD thesis, Vanderbilt University, Nashville, 1984.
[51] Schwingungseinwirkung auf den menschlichen Körper, VDI-2057, 1981.
[52] I.M. Sobol, Points uniformly distributed over a multidimensional cube, "Znaniye", 1985.
[53] N. Srinivas and K. Deb, Multiobjective optimization using non-dominated sorting in genetic algorithms, "Evolutionary Computation", 2/3, 1994.
[54] R.B. Statnikov and I.B. Matusov, Multicriteria machines design, "Znan-iye", 1989.
[55] J.E. Taylor, Maximum strength elastic structural design, ASCE, 95, 1969.
[56] A.B. Templeman, Discrete optimum structural design, "Computers and Structures", 30, 1988, pp. 511-518.
[2] P.M. Calderale, A. Grosso, and E. Marucco, Integration between the systematic and the creative approach in mechanical design, in "Proceeding of the XXV AIAS National Conference - Int. Conf. on Material Engineering", 1996.
[3] Alberto Colorni, Ricerca Operativa, Città Studi, 1991.
[4] W. Cormick, Nonlinear Programming, John Wiley & Sons, New York, 1973.
[5] L. Davis, Genetic Algorithms and Simulated Annealing, Pitman, Lon-don, 1990.
[6] L. Davis, The Handbook of Genetic Algorithms, Van Nostrand Reingold, New York, 1991.
[7] Discrete and Topologycal Structural Optimization, CISM, Udine, 1996.
[8] C. Doniselli, Su alcuni problemi di progetto del comando delle valvole con eccentrico e bilancere, Technical report, Dip. Meccanica, Politecnico di Milano, 1971.
[9] C. Doniselli and G. Mastinu, Bus suspension design: Optimization for comfort, in "Proc. of the 2nd International Conference - Vehicle Comfort (ergonomic, vibrational, noise and thermal aspects)", ATA, 1992.
[10] C. Doniselli and G. Mastinu, Tribological problems of cam gear design: Theoretical study and experimental simulation, in "Proc. of the 1st International Seminar High Performance S.I. Engines for Passenger Cars", ATA, 1992.
[11] C. Doniselli and G. Mastinu, Contributo alla soluzione di alcuni problemi di progettazione di sospensioni dell'autoveicolo, ATA, 1993.
[12] C. Doniselli and G. Mastinu, A method for optimal of valve gears, in "Proc. of the 2nd Int. Seminar High Performance S.L Engines for Passengers Cars", ATA, 1995.
[13] C. Doniselli, G. Mastinu, and M. Gobbi, Aerodynamic effects on ride comfort and road holding of automobiles, in "Proc. of the XIV IAVSD Symposium", Ann Arbor, Swets & Zeitlinger, 1995.
[14] C. Doniselli and V. Rongoni, Sul danneggiamento della coppia eccentrico-bilancere e relative scelte di progetto, ATA, 1975.
[15] H. Eschenauer et al., Multicriteria Design Optimization, Springer-Verlag, Berlin, 1990.
[16] R.L. Fox, Optimization Methods for Engineering Design, Addison-Wesley, 1971.
[17] R. Garfinkel and G. Nemhauser, Integer Programming, John Wiley & Sons, New York, 1972.
[18] M.D. Genkin et al., Multicriteria selection of optimal parameters for the automobile engine valve gear, "Mashinovedeniye", 3, 1983, pp. 60-68.
[19] A. Giussani, Applicazione degli algoritmi genetici alla progettazione strutturale, con particolare riguardo al calcolo dei telai motociclistici, Master thesis, Dip. Meccanica, Politecnico di Milano, 1996.
[20] M. Gobbi, Optimal design supported by stochastic search: a tutorial, Technical report, Dip. Meccanica, Politecnico di Milano, 1996.
[21] D.E. Goldberg, Genetic Algorithms in Search, Optimization, and Machine Learning, Addison-Wesley, 1989.
[22] D.E. Goldberg and J. Richardson, Genetic algorithms with sharing for multi-modal function optimization, in "Proceedings of the Second International Conference on Genetic Algorithms", 1987.
[23] P. Hajela, Genetic Algorithms in Automated Structural Synthesis, Optimization and Decision Support Systems, Kluwer Academic Publishers, 1990.
[24] P. Hajela, Stochastic search in discrete structural optimization, in "Discrete and Topologycal Structural Optimization", CISM, Udine, 1996.
[25] E.J. Haug and J.S. Arora, Applied Optimal Design, John Wiley & Sons, New York, 1979.
[26] W. Heinrich, Kreatives Problemlösen in der Konstruktion, in "Konstruktion", 44, 1992, pp. 57-63.
[27] J. Hertz, A. Krogh, and R.G. Palmer, Introduction to the Theory of Neural Computation, Addison Wesley, 1991.
[28] J. Holland, Adaptation in Natural and Artificial Systems, The University of Michigan Press, Ann Arbor, 1975.
[29] P. Kamat (ed.), Structural Optimization: Status and Promise, AIAA, Washington, 1993.
[30] U. Kirsh, Optimum Structural Design, McGraw-Hill, New York, 1981.
[31] W. Kortüm et al., Progress in integrated system analysis and design software for controlled vehicles, in "The Dynamics of Vehicles and Railway Traks", S. Shen (ed.), Swets & Zeitunger, 1993.
[32] B. Kroöse and P. van der Smagt, An Introduction to Neural Networks, The University of Amsterdam, 1993.
[33] H.W. Kuhn and A.W. Tucker, Nonlinear programming, in "Proceedings of the Second Berkeley Symposium on Mathematical Statistics and Probability", J. Neyman (ed.), Berkeley, 1951 pp. 481-492.
[34] C.Y. Lin and P. Hajela, Genetic search strategies in multi-criterion optimal design, "Structural Optimization", 4, 1992, pp. 99-107.
[35] G. Mastinu, Automotive suspension design by multi-objective programming, in "Proc. of the International Symposium on Advanced Vehicle Control AVEC94", JSAE, Tsukuba, 1994.
[36] G. Mastinu. Integrated controls and interactive multi-objective programming for the improvement of ride and handling of road vehicles, in "Smart Vehicles", J.P. Pauwelussen and H.B. Pacejka (eds.), Swets & Zeitlinger, 1995.
[37] G. Mastinu, E. Babbel, P. Lugner, D. Margolis, P. Mittermayr and B. Richter, Integrated controls of lateral vehicle dynamics, in "Proc. of the XXIII IAVSD Symposium", Swets & Zeitlinger, 1993.
[38] G. Mastinu and M. Gobbi, Sistema flessibile per la misura di grandezze che descrivono il moto dei veicoli, "Trasporti e Trazione", 1997.
[39] The Mathworks, Optimization Toolbox User's Guide, 1996.
[40] J.B. Matusov, Multicriteria Optimization and Engineering, Chapman & Hall, New York, 1995.
[41] J.J. Moré, Optimization Software Guide, SIAM, Philadelphia, 1993.
[42] W.-Y. Ng, Interactive Multi-Objective Programming as a Framework for Computer-Aided Control System Design, Springer-Verlag, Berlin, 1989.
[43] W. Overdieck, B. Richter and P. Zimmermann, Evolutionsstrategie ein Hilfsmittel bei der Lösung fahrzeugetechnischer Aufgaben, ATZ, 84, 1982, pp. 331-337.
[44] V. Pareto, Manuale di economia politica, Società Editrice Libraria, Milano, 1906.
[45] D. Perani and L. Persico, Progettazione con algoritmi genetici del telaio di un motociclo, Master thesis, Dip. Meccanica, Politecnico di Milano, 1996.
[46] D.T. Pham and Y. Yang, Optimization of multi-modal discrete functions using genetic algorithms, in "Proc. Inst. Mech. Engrs", 207, 1993.
[47] W. Press, S. Teukolsky, W. Vetterling, and B. Flannery, Numerical Recipes, Cambridge University Press, Cambridge, 1992.
[48] U.T. Ringertz, On methods for discrete structural optimization, "Engineering Optimization", 13, 1988, pp. 47-64.
[49] W. Rodenacker, Neue Gedanken zur Konstruktionsmethodik, "Konstruktion", 43, 1991, pp. 330-334.
[50] J.D. Schäffer, Some Experiments in Machine Learning Using Vector Evaluated Genetic Algorithms, PhD thesis, Vanderbilt University, Nashville, 1984.
[51] Schwingungseinwirkung auf den menschlichen Körper, VDI-2057, 1981.
[52] I.M. Sobol, Points uniformly distributed over a multidimensional cube, "Znaniye", 1985.
[53] N. Srinivas and K. Deb, Multiobjective optimization using non-dominated sorting in genetic algorithms, "Evolutionary Computation", 2/3, 1994.
[54] R.B. Statnikov and I.B. Matusov, Multicriteria machines design, "Znan-iye", 1989.
[55] J.E. Taylor, Maximum strength elastic structural design, ASCE, 95, 1969.
[56] A.B. Templeman, Discrete optimum structural design, "Computers and Structures", 30, 1988, pp. 511-518.
